- DALI Dimmable Driver
- TRIAC Series
- Drivers 5-in-1
- DMX Series
- LED Power Amplifiers Series
- IP-BUS Control System
- 0-10V/1-10V Series
- Signal Converters Series
- Waterproof Series
- Wireless LED Controller
- Battery-less Wireless Series
- Microwave Motion Sensors
- Non Dimmable LED Drivers Series
- LED LINEAR LIGHTING
Programming A GE Universal Remote Instructions
This guide will guide you through the programming of the GE universal remote control.
You can use it to control the TV, DVD, or even satellite or cable box.
When it comes to controlling the DVD player, there are enough buttons on the remote to perform the task well.
Also, with the GE universal remote control, you don\'t have to worry about losing your programmed code when you replace the battery.
GE universal remote control programming instructions 1.
First of all, you want to power on the device you want to control-TV, DVD, VCR etc2.
Find the code search/Settings button on the universal remote control.
Press and hold this button.
Do this before the indicator lights up.
Then release the button. 3.
The next step is to press and release the remote button of the device (TV, DVD or VCR)
The code you want to enter.
The indicator light appears and remains on. 4.
Now you can enter the code provided for your device model.
After entering the code, the indicator light will turn off. 5.
The final step is to test if the remote control works for the device you program.
To do this, press the power button.
If your device is powered off, then your remote device can work for that particular device.
Depending on your device brand, you may list multiple codes for your device.
If the first code does not work, try the next and next.
Use the code search function if you have tried the code listed for your device brand and cannot get your device to respond, please do not give up.
You can try the code search function.
Here are the steps you should follow: 1.
Make sure that the device you want to program is powered on. 2.
Find the code search/Settings button and hold it down.
Wait until the indicator lights up.
Then release the button. 3.
Find the button for the device (TV, DVD or VCR)
You want to program on the remote control.
After flashing once, the indicator lights up. 4.
Now, you want to press and release the power button on the remote control before the device is turned off.
If your device is not powered off, then you have to wait a few seconds before trying again.
Product developers warn that you have to try up to 250 times before you power off your device. 5.
When you manage to power the device off, press the Enter button or the OK button on the remote control.
You are ready when the indicator light is off.
Sleep function if you want to turn off the TV automatically after a period of time, you will want to take advantage of the sleep function.
With the GE universal remote control, you can choose to turn off the TV in a few minutes.
Here are the steps to follow: 1.
Find the sleep button.
Hold it down until the indicator appears. 2.
Enter 1 to 99 minutes.
You must enter 0 before the number.
For example, you have to enter 020 if you choose 20 minutes.
In order for the sleep function to work properly, the remote control must be aligned to the TV.
If you want to disable the sleep feature, press and hold the sleep button until the indicator light starts flashing.
Alternatively, you can turn the power off by pressing the power button on the remote control.
At the time of writing this report, the price of the GE universal remote control was $14.
99, available from this website.
Jascoproducts provides GE Universal remote images.