- DALI Dimmable Driver
- TRIAC Series
- Drivers 5-in-1
- DMX Series
- LED Power Amplifiers Series
- IP-BUS Control System
- 0-10V/1-10V Series
- Signal Converters Series
- Waterproof Series
- Wireless LED Controller
- Battery-less Wireless Series
- Microwave Motion Sensors
- Non Dimmable LED Drivers Series
- LED LINEAR LIGHTING
points to consider while choosing rf remote control
The programming and learning functions are very simple, which can simplify the operation of the system and reduce confusion.Many remote controls have a macro command function that can perform several system functions with just one button.While the erf remotes are more expensive than the more standard infrared remotes, they justify the cost because they are larger in scope and do not rely on online vision, also known as LOS.
Unlike the infrared remote control, the RF remote control does not require a lineof-Because RF signals can go through the floors, walls, and cabinets, you can see to send commands to your gear.If all your equipment is not in the same room or location.You may need a programmable remote control system.
This is also a great choice for people who want to be singleRemote simplicity of their entire system.Here are some of the precautions you may use when choosing a different choice in the market.1) take some time to use your system and make some notes.
Depending on the type of electronic device you currently have, you will find a remote or remote system that can control a variety of functions, including power supply, playback and recording modules, adjustments, and channels.2) select an RF remote control, which is also a \"learning\" remote control that you can program to control all your audio/video devices.With just one remote control, you can enjoy simplified system operation.
3) it is strongly recommended that you perform this task to understand the type of device you will be using remote management primarily.4) If you plan to use your remote management program for all devices placed in one space, it is critical to consider the size of the space.5) consider the size of the room, if some parts are in a closed cabinet or equipment closet, or, if the component is inferred relative to the remote (IR) the site line of the red beam is in a different area or in a different direction.
6) consider the number of users who need access to the remote and how they will access your system.This is especially important when you have different family members who want their own unique device settings or configurations