Wholesale microwave motion sensors in China for Lighting control system

10W 120/180/240/300mA*1ch CC DALI Driver

Model: IP-MSensor
Operating voltage: 12Vdc (Can be customized)
HF system: 5.8GHz±75MHz, ISM wave band
Transmitting power:<0.5mW
Power consumption: ≤0.5W(standby),<1W(operation)
Detection zone: Max.(D x H):16mx6m

12VDC dry contact motion detector IP-MSensor

Introduction

The IP-MSensor is an innovative and active motion detectors with HF system 5.8GHz.Motion can be detected through plastic, glass and thin non-metal materials.

It supplies dry contacts in normally closed mode and normally open mode. Dry contact means open or close contact without any current or voltage. It is prefect for use in the solar energy garden lamp or industrial control application where requires isolation between motion signal and power supply.

Product Features

• Dry contact detector works in normally closed mode and normally open mode.

• Automatic switching based on motion and light level.

• Low voltage input 12VDC.

• Detection area, time delay and daylight threshold can be precisely set via DIP switch.

Technical Parameter