loading
IPON LED  >  AI - Page Sitemap  >  New microwave motion sensors Factory price for Lighting control
New microwave motion sensors Factory price for Lighting control

New microwave motion sensors Factory price for Lighting control
  • New microwave motion sensors Factory price for Lighting control

New microwave motion sensors Factory price for Lighting control

IPON General Electric Industry Co.Ltd. leads the microwave motion sensors industry for years.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Each of IPON LED has undergone constant physical, chemical, and microbiological tests to ensure that the quality is up to the international beauty makeup standard. Choose IPON, Choose A Brighter Future
2. As time goes by, the quality of microwave motion sensors is still good as before. Ideal for Any Lighting System
3. The product is durable in use. The use and abuse testing of this product are available to verify that it can be collected for a long time.
4. The product won't give out an odor. The surface of this product forms a strong hydrophobic shield which prevents the build-up of bacteria and germs. Solutions Beyond Illumination


10W 120/180/240/300mA*1ch CC DALI Driver


Model: IP-MSensor
Operating voltage: 12Vdc (Can be customized)
HF system: 5.8GHz±75MHz, ISM wave band
Transmitting power:<0.5mW
Power consumption: ≤0.5W(standby),<1W(operation)
Detection zone: Max.(D x H):16mx6m


12VDC dry contact motion detector IP-MSensor


Introduction

The IP-MSensor is an innovative and active motion detectors with HF system 5.8GHz.Motion can be detected through plastic, glass and thin non-metal materials.

It supplies dry contacts in normally closed mode and normally open mode. Dry contact means open or close contact without any current or voltage. It is prefect for use in the solar energy garden lamp or industrial control application where requires isolation between motion signal and power supply.


Product Features

• Dry contact detector works in normally closed mode and normally open mode.

• Automatic switching based on motion and light level.

• Low voltage input 12VDC.

• Detection area, time delay and daylight threshold can be precisely set via DIP switch.


Technical Parameter


Product Name

12VDC dry contact motion detector

Model

IP-MSensor

Operating voltage

12Vdc (Can be customized)

HF system

5.8GHz±75MHz, ISM wave band

Transmitting power

<0.5mW

Power consumption

≤0.5W(standby),<1W(operation)

Detection zone

Max.(D x H):16mx6m

Detection sensitivity

10%/25%/50%/75%/100%

Hold time

10s/30s/90s/3min/20min/30min

Daylight sensor

5lux/10lux/30lux/50lux/Disable

Mounting height

6m Max.

Motion detection

0.5~3m/s

Detection angle

150°(wall installation)/360° (ceiling installation)

Operating temperature

-25℃~70℃

IP rating

IP20



Company Features
1. IPON General Electric Industry Co.Ltd. leads the microwave motion sensors industry for years.
2. Listing technology as a main focus in IPON LED proves to be really efficient.
3. Our mission is to create more value for our customers and consumers, for the communities we operate in, and for the company – while reducing our environmental footprint at the same time.
IPON LED microwave motion sensors is processed to minimize the impact on the environment including minimum waste output in the production process and the reduction of packaging material. Thanks to built-in its heat dissipation device, the product features high conversion efficiency
The manufacture of IPON LED microwave motion sensors involves a series of processes, from the mixture of the raw material to forming, cutting and packaging. This product is totally free of light glare
The production of IPON LED microwave motion sensors is fully automated. The necessary amounts of raw materials or water are exactly calculated by the computer. The product perfectly works with all ballast types
The raw materials of IPON LED microwave motion sensors are sourced from reliable suppliers who have considered to minimize the transport costs and resultant emissions. With a strong light penetration ability, this product guarantees a safe drive
IPON LED microwave motion sensors is created throughout a series of production processes which include raw material extraction, raw material process, and quality inspections. This product performs well in extreme conditions like rain and fog
microwave motion sensors is an excellent and well-made product which is manufactured based on high-quality materials. It has an attractive appearance and strong resistance to acid, corrosion, abrasion, scratch, high temperature, and low temperature.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...