Application Scope

The Led Driver Manufacturers developed by IPON is widely used in Manufacturing Lights & Lighting Lighting Accessories industry.IPON has professional engineers and technicians, so we are able to provide one-stop and comprehensive solutions for customers.

Company Advantages
1. IPON LED led wireless drivers has passed various quality tests. These tests include electrical strength tests, which improves it meet European electrical safety standards.
2. The quality of the product is assured in every step of production.
3. This product protects the wearer from rough surfaces, rash-causing plants, insect bites, splinters, thorns, and prickles by providing a barrier between the skin and the environment.

900mA*1ch 2.4G CC LED Driver**

- Model: IP1HMC-30R-0
- Output Current: 550/600/650/700/750/800/850/900mA
- Power: 30W
- Current accuracy: ±5%
- Output LF current ripple(< 120 Hz): ＜3%
- Channels: 1
- Input Voltage: 200–240VAC

30W 550/600/650/700/750/800/850/900mA*1ch 2.4G Constant Curent LED Driver IP1HMC-30R-0

IP1HMC-30R-0 is a constant output mode LED driver. The output current can be easily set via DIP switch, This driver could be controlled by the 2.4G remote to dim lightings. Each driver could at the same time be matched and controlled by 10 remotes, and one remote can match unlimited drivers.

Feature

1. Single channel output, output current level selectable by DIP S.W

2. Using 2.4GHz RF remote control

3. Built-in active PFC function

4. Class 2 power supply. Full protective plastic housing

5. Dimming effect smooth, no flicker

6. Protections: Short circuit, over load, over temperature

7. Suitable for indoor LED lighting application, such as down light, panel light, and so on

Technical Parameter

Model		IP1HMC-30R-0
Output	Current	550mA	600mA	650mA	700mA
	Voltage	9-45VDC	9-45VDC	9-45V	9-43VDC
	Power	25W	27W	29.25W	30.1W
	Current	750mA	800mA	850mA	900mA
	Voltage	9-40VDC	9-38VDC	9-35VDC	9-34VDC
	Power	30W	30.4W	29.75W	30.6W
	Current accuracy	±5%
	Maximum output voltage	50VDC
	Output LF current ripple(< 120 Hz)	＜3%
	Channels	1
Input	Voltage	200– 240VAC
	Frequency	50/60Hz
	Power factor	＞0.95@230VAC,full load
	Efficiency	83%@230VAC,full load
	Current	0.20Amax@230VAC
	THD	＜15%@230VAC, full load
	Inrush current	Cold start,15A(twidth =22us measured at 50% lpeak)@230VAC
Protections	Short Circuit	Close output, recovers automatically after fault removed
	Over Load	When the output voltage is exceeded, the output current decreases and, recovers automatically when the load is reduced
	Over Temperature	Shut down the output, recovers automatically when temp. back to normal
Function	Dimming	2.4GHz RF remote control
Others	Dimension	1504329 mm
	G.W.	130g
	Working temp.	-20℃ ~ 50℃
	Relative humidity	20~90% RH

Company Features
1. As a competitive manufacturer, IPON General Electric Industry Co.Ltd. has strong abilities to design and manufacture innovative led driver dimmer and related products.
2. With top raw material and experienced workers, led driver suppliers is produced with high quality.
3. IPON General Electric Industry Co.Ltd. is dedicated to provide customers with cost-effective products and convenient technical support. Please contact us! The service quality has been always highly stressed by IPON LED. Please contact us!

z******o

During the production, the quality of IPON LED led wireless drivers is strictly scrutinized in terms of cutting, stamping, welding, polishing, surface treatment, and drying. The product has been tested under frequent current measurements

e******q

IPON LED led driver suppliers has passed the FCC, CE and ROHS safety certification, which is regarded as an internationally qualified product.It is commonly installed in transformers, reactors, inductors, breakers, inverters, etc

w******m

IPON LED led driver suppliers is produced under the precise and highly efficient die-casting machine which can greatly reduce the electric power and metal materials consumption. The product is highly resistant to corrosion

f******m

Before the IPON LED led wireless drivers is stored or shipped, the finishing operations and inspection remain to be performed following curing. The finishing operation trims flash or excess rubber.

n******r

In IPON LED led driver dimmer manufacture, a relevant quality control inspection is performed after each production step. For example, the incoming metallic elements are subjected to a strict test. It is characterized by low power losses

d******v

The product features high stability in dimension. It has undergone stabilizing heat treatment which can improve the dimensional accuracy of its machinery spare parts. The product has a high power throughput

Product Message

*Name

Phone

*E-mail

*Content

Wireless led driver dimmer China for Lighting control

30W 550/600/650/700/750/800/850/900mA*1ch 2.4G CC LED Driver

**30W 550/600/650/700/750/800/850/900mA*1ch 2.4G CC LED Driver**