loading
IPON LED  >  AI - Page Sitemap  >  professional buy led driver Suppliers for Lighting control
professional buy led driver Suppliers for Lighting control

Professional buy led driver Suppliers for Lighting control

Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

150W 24VDC CV DALI,1-10V Driver

- Model: IP1H24V-150AD-0
- Output Channels1
- Output Voltage24VDC
- Output Current6.25A
- Output Power150W
- Voltage Accuracy±3%
- R & N (Max)400mVp- p
- Input Voltage220VAC – 240VAC
- Frequency50/60Hz

150W 24VDC Constant Voltage DALI,1-10V Driver 

IP1H24V-150AD-0 is a constant voltage mode output LED driver. This driver complies with DALI standard protocol IEC 62386,and provides multiple dimming function (DALI,1-10V active signal ,PWM, adjustable resistance, and Touch DIM) to achieve a smooth dimming effect.


Features

· Single channel constant voltage output

· Support a variety of dimming modeDALI/1-10V active signal/adjustable resistance/PWM/Touch DIM

· High range of input voltage 220VAC ~ 240VAC

· Built-in active PFC function

· Dimming effect smooth, no flicker

· Over load protection; Short circuit protection; Over temperature protection

· Suitable for indoor LED lighting application, such as LED strips, spot light, wall washer, and so on


Technical Parameter 

Model

IP1H24V-150AD-0

Output

Channels

1

Voltage

24VDC

Current

6.25A

Power

150W

Voltage Accuracy

±3%

R & N (Max)

400mVp- p

Input

Voltage

220VAC – 240VAC

Frequency

50/60Hz

Efficiency

90%@230VAC,full load

PF

0.95@230VAC,full load

THD

10%@230VAC,full load

Current

0.8Amax@230VAC

Inrush current

Cold start,27A(twidth=650us measured at 50% Ipeak) @230VAC

Protection

Short circuit

Close the output, restart to recover since fault condition is removed for 10s

Over temperature

Shut down the output, recovers automatically when temp. back to normal

Over load

Limit the output power to 100% to 150%

Function

Dimming mode

DALI/Touch DIM/1-10V/Adjustable resistance /PWM

Others

Dimension

310*60*45mmL*W*H

Packing size

315*66*50 mmL*W*H

G.W.

860g

Working temp.

-20℃ ~ 50℃

Relative humidity

20~90% RH



The tests for IPON LED buy led driver cover a few aspects. They are mainly electric leakage, overload, PCB performance, overvoltage, and insulation tests.
IPON LED buy led driver is produced strictly in line with the quality regulations for interior decoration materials. Before shipping, it will be inspected in terms of formaldehyde content, harmful substances contained in the glue and adhesive, as well as the toxic ingredients in the paint.
Each IPON LED buy led driver is generally tested before delivery. The test includes electromagnetic compatibility (EMC) testing, electrical safety testing, radiofrequency testing, chemical analysis, and energy efficiency testing.
The manufacturing process for the materials of IPON LED buy led driver includes many steps that determine the precise set of properties for the finished product, such as wrinkle resistance and colorfastness.
The creation of IPON LED buy led driver is in line with international electrical safety standards. It meets the requirements of IEC, EMC, CE marking, etc.
IPON General Electric Industry Co.Ltd. Using cost-effective raw materials, highly automated production lines and equipment to manufacture buy led driver can maximize the reduction of material processing loss rate, increase production and production capacity, and under the premise of unchanged product quality and performance , Maximize the reduction of product cost and improve the overall cost performance of the product.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...