Motion Detector motion detector manufacturer for Lighting control

Company Advantages
1. Assessment of quality will be conducted once IPON LED DC Operation Dry Contact Motion Detector is produced. It will be strictly checked on such parameters as fibers strength, water shrinkage, colorfastness, weaving strength, etc. Solutions Beyond Illumination
2. With this product, people are blessed with more free time and capable of doing more things. It has become a must-have in modern life. To Control Lights. To Protect Lights
3. The quality of the product is fully assured by the implementation of the strict quality management system. Be Bright, Turn To IPON
4. The product, inspected throughout the production, is sure to be of high quality.
5. A team of highly experienced quality inspectors empowers us to provide this product in accordance with the international standards. A Smart Lighting Control Solution

10W 120/180/240/300mA*1ch CC DALI Driver

Model: IP-MSensor
Operating voltage: 12Vdc (Can be customized)
HF system: 5.8GHz±75MHz, ISM wave band
Transmitting power:<0.5mW
Power consumption: ≤0.5W(standby),<1W(operation)
Detection zone: Max.(D x H):16mx6m

12VDC dry contact motion detector IP-MSensor

Introduction

The IP-MSensor is an innovative and active motion detectors with HF system 5.8GHz.Motion can be detected through plastic, glass and thin non-metal materials.

It supplies dry contacts in normally closed mode and normally open mode. Dry contact means open or close contact without any current or voltage. It is prefect for use in the solar energy garden lamp or industrial control application where requires isolation between motion signal and power supply.

Product Features

• Dry contact detector works in normally closed mode and normally open mode.

• Automatic switching based on motion and light level.

• Low voltage input 12VDC.

• Detection area, time delay and daylight threshold can be precisely set via DIP switch.

Technical Parameter

Company Features
1. IPON General Electric Industry Co.Ltd. has been committed to the production of motion detector many years ago.
2. Different mechanisms are provided for fabricating different microwave motion sensors .
3. Our company bears social responsibilities. We have drastically reduced our energy and water consumption since establishment whilst growing in size and output.