- Model: IP-G-DALI
- Input voltage: Supplied via IP-BUS bus
- Communication protocol: IP-BUS
- The number of DALI equipment: 64 IP-G-DALI
- The number of dry contact: 1
IP-BUS To DALI Gateway IP-G-DALI
In the IP-BUS system, the user can control the equipment complying with DALI standard protocol via IPG-DALI gateway. The user can assign(including reassign, extent allocation) the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance.
Features
1. Assign(including reassign, extent allocation) the address for DALI equipment
2. In IP-BUS mode, can update firmware remotely via IP-BUS interface
3. Support IP-BUS function to the DALI command
4. Set parameter for DALI equipment, and, can be used with the DALI sensor, DALI panel
5. Support IP-BUS to DALI command function
6. Supplied via IP-BUS bus, without external power supply
7. The standard 35mm din rail, convenient installation
Technical Parameter
Item | Parameters |
Input voltage | Supplied via IP-BUS bus |
Communication protocol | IP-BUS |
The number of DALI equipment | 64 |
The number of dry contact | 1 |
Equipment size | 76*93.4*63.2mm(L*W*H),standard 35mm din rail |
G.W. | 250g |
Operational temperature | -20-50℃ |
Relative humidity | 20-90%RH |
Copyright © 1998 ~ 2024 IPON General Electric Industry Co.Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.