loading
IPON LED  >  AI - Page Sitemap  >  IPON LED led driver constant current for business for Lighting control system
IPON LED led driver constant current for business for Lighting control system

IPON LED led driver constant current for business for Lighting control system

Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of IPON LED led driver constant current for business for Lighting control system

50W 1050~1400mA*1ch CC 1-10V Driver

- Model: IP1HMC-50A-1
- Input Voltage: 220–240VAC
- Output Power: 50W
- Output Current: 1050~1400mA
- Channels: 1

50W 1050/1100/1150/1200/1250/1300/1350/1400mA Constant Current 1-10V Driver  

IP1HMC-50A-1 is a constant output mode LED driver. The output current can be easily set via DIP switch, and the driver can be adjusted by the external 1-10VDC active signal, PWM signal , or adjustable resistance to achieve the smooth dimming effect.


Features

1. Single channel output, output current level selectable by DIP S.W.

2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM)

3. High input voltage of 220VAC ~ 240VAC

4. High efficiency up to 88%

5. Built-in active PFC function

6. 100% output when no dimming signal input, can be used as normal power supply

7. Dimming effect smooth, no flicker

8. Protections: Short circuit, over load, over temperature

9. Suitable for indoor LED lighting application, such as down light, panel light, and so on


Technical Parameters

Model

IP1HMC-50A-1

Output

Current

1050mA

1100mA

1150mA

1200mA

Voltage

9-45VDC

9-45VDC

9-43VDC

9-42VDC

Power

47.25W

49.5W

49.45W

50.4W

Current

1250mA

1300mA

1350mA

1400mA

Voltage

9-40VDC

9-38VDC

9-37VDC

9-36VDC

Power

50W

49.4W

49.95W

50.4W

Current accuracy

±5%

Maximum output voltage

55VDC

Output LF current ripple(< 120 Hz)

3%

Channels

1

Input

Voltage

220VAC – 240VAC

Frequency

50/60Hz

Power Factor

≧0.95@230VAC, full load

Efficiency

88%@230VAC, full load

THD

10%@230VAC, full load

No-load power consumption

0.5W

Current

0.28A max@230VAC

Inrush current

Cold start,40A(twidth=12.8us measured at 50% Ipeak) @230VAC

Protection

Short circuit

Close output, recovers automatically after fault removed

Over load

When the output voltage is exceeded, the output curret decreases and, recovers automatically when the load is reduced.

Over temperature

Shut down the output, recovers automatically when temp. back to normal.

Function

Dimming

1-10V active signal, adjustable resistance, PWM

Others

Dimension

137 *82*31 mmL*W*H

G.W

225g

Working temp.

-20℃ ~ 50℃

Relative humidity

20~90% RH



Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...