IPON LED  >  AI - Page Sitemap  >  IPON LED High sensitivity constant current driver factory for Lighting control
IPON LED High sensitivity constant current driver factory for Lighting control

IPON LED High sensitivity constant current driver factory for Lighting control

Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of IPON LED High sensitivity constant current driver factory for Lighting control

40W 850~1200mA CC 1-10V Driver

- Model: IP1HMC-40A-1
- Input Voltage: 220–240VAC
- Output Power: 40W
- Output Current: 850~1200mA
- Channels: 1

40W 850/900/950/1000/1050/1100/1150/1200mA Constant Current 1-10V Driver 

IP1HMC-40A-1 is a constant output mode LED driver. The output current can be easily set via DIP switch, and the driver can be adjusted by the external 1-10VDC active signal, PWM signal , or adjustable resistance to achieve the smooth dimming effect.


Features

1. Single channel output, output current level selectable by DIP S.W.

2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM)

3. High input voltage of 220VAC ~ 240VAC

4. High efficiency up to 88%

5. Built-in active PFC function

6. 100% output when no dimming signal input, can be used as normal power supply

7. Dimming effect smooth, no flicker

8. Protections: Short circuit, over load, over temperature

9. Suitable for indoor LED lighting application, such as down light, panel light, and so on


Technical Parameters

Model

IP1HMC-40A-1

Output

Current

850mA

900mA

950mA

1000mA

Voltage

9-45VDC

9-44VDC

9-42VDC

9-40VDC

Power

38.25W

39.6W

39.9W

40W

Current

1050mA

1100mA

1150mA

1200mA

Voltage

9-38VDC

9-36VDC

9-35VDC

9-33VDC

Power

39.9W

39.6W

40.25W

39.6W

Current accuracy

±5%

No load output voltage

55VDC

Output LF current ripple(< 120 Hz)

3%

Channels

1

Input

Voltage

220VAC – 240VAC

Frequency

50/60Hz

Power Factor

≧0.95@230VAC, full load

Efficiency

88%@230VAC,full load

THD

10%@230VAC, full load

No-load power consumption

0.5W

Current

0.23A max@230VAC

Inrush current

Cold start,40A(twidth=12.8us measured at 50% Ipeak) @230VAC

Protection

Short circuit

after fault removed Close output, the output current recovers automatically

Over load

When the output voltage is exceeded, decreases and, recovers automatically when the load is reduced.

Over temperature

Shut down the output, recovers automatically when temp. back to normal.

Function

Dimming

1-10V active signal, adjustable resistance, PWM

Others

Dimension

137 *82*31 mmL*W*H

G.W

225g

Working temp.

-20℃ ~ 50℃

Relative humidity

20~90% RH



Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...