- Model: IP15V-Multidim-0
- Input Voltage: 12/24VDC
- Output Power: 180W/12V, 360W/24V
- Output Current: 15A max
- Channels: 1
12V 24V DC 1 Channel Constant Voltage Dimmable Driver IP15V-Multidim-0
This is a multi-functional LED dimmer, dimming mode, dimming curve, min brightness level all can be selected by dip switch.
Product Name: 12V 24V DC 1 Channel Constant Voltage Dimmable Driver
(with warring led)
Over Current Protect
Over Temperature Protect
Available in touch dim
Function Select Table
1. Analog Dim/Touch Dim Switch Table
Analog dim mode is selected by Switch bit 6 to off status, and if switch bit 6 to on status Touch Dim function will be selected.
Touch dimmer is only a switch, signal isn’t have polarity in touch dim function.
2. Min Brightness Switch Table
Min brightness can be set in this dimmer from 0-15%. This function is available in both analog function and touch dim function. This feature is very effective to solve the led flicker issue in low-end. If led flicker, please up-regulate the min brightness.
3. Anti-interference Switch Table
Normal or Hysteresis
4. Dimming Curve Switch Table
Linear dimming or Logarithmic Dimming
5. Dimming Mode Switch Table
0-10V Dimming or 1-10V dimmng
1. Analog dimmer mode
2. Touchdim mode
1. Short press the Touch DIM switch (<0.5s) to control the lamp on or off.
2. Long press the Touch DIM switch (>0.5s) to dim the brightness of light;
The Dimming direction will inverse each time after long pressing switch.
(3)When the light power off, long press the Touch DIM switch can turn on the light and adjust it brightness according to the dimming direction.
(4)The brightness adjustment range is 5%-100%, and the light can be turned off through short pressing.
(5)Power off memory function, the power-down state before will be maintained when power on again.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.