Top quality daylight sensor factory for Lighting adjustment

Product Information of IPON LED daylight sensor factory for Lighting adjustment

Product Comparison

Good materials, advanced production technology, and fine manufacturing techniques are used in the production of Led Driver Manufacturers. It is of fine workmanship and good quality and is well sold in the domestic market.IPON guarantees Led Driver Manufacturers to be high-quality by carrying out highly standardized production. Compared with other products in the same category, it has the following advantages.

Company Advantages
1. By using quality-approved components, IPON LED automatic daylight sensor switch is manufactured under the visionary guidance of our experts in accordance with global market standards with the aid of pioneering techniques.
2. The product is equipped with overheating protection. It is designed with a heat sink that can dissipate heat out, to protect the electric components from damage.
3. This product can store energy reasonably well for a long time with low self-discharge. It will not be affected by outer elements such as temperature, moisture, vibration, shock, etc.
4. This product is increasingly used in the market due to its significant economic benefits.
5. The product, competitively priced, is popular in the market and has huge market potential.

1-10VDC 50mA Daylight Sensor

Model: IP1-S
Operating voltage: 1-10Vdc
Max. current sink: 50mA (Maximum rating)
Dimming range: 1%-100%
Color coding of cable: Red +, Black
Cable length: 80cm
Detection angle: 90°
Operating temperature: 0℃~45℃
IP rating: IP20

1-10VDC 50mA Daylight Sensor IP1-S

Introduction

Faced with the skyrocketing cost of energy and environmental concerns, builders, architects and lighting experts are increasingly turning to day lighting as a primary source of illumination, and proper daylight can increase the comfort. To take full advantage of daylight integration, buildings should have automated controls that either turn off or dim artificial light in response to the available daylight in the space. this is called‘daylight harvesting’.

IP1-S supplies a simple and effective solution for daylight harvesting. connecting to 1-10V interface and using photocell to measure ambient lux level and automatically calculate how much artificial light is needed, and then convert the amount of light to 1-10V dimmable control gears (ballasts or LED drivers). 1-10V dimmable control gears adjust the lighting output according to the signal from the daylight sensor.

Product Features

• Provides an energy saving without sacrificing visual comfort.

• With ambient light dependent control.

• Directly connected to 1-10V interface.

• Simple setting of the target light level by mean of potentiometer.

Technical Parameter

Product Name	1-10VDC 50mA Daylight Sensor
Item	IP1-S
Operating Voltage	1-10VDC
Max. current sink	50mA (Maximum rating)
Dimming range	1%-100%
Color coding of cable	Red +, Black -
Cable length	80cm
Detection angle	90°
Operating temperature	0℃~45℃
IP Rating	IP20

Company Features
1. IPON General Electric Industry Co.Ltd. has been providing high performance to the market since establishment daylight sensor .
2. IPON General Electric Industry Co.Ltd. has a group of daylight sensor switch specialist team.
3. Oriented by daylight sensor ,IPON LED exclusively manages the business. Check now! Since its establishment, IPON General Electric Industry Co.Ltd. has been consistently adhering to the business principle of integrity orientation. Check now! IPON LED has formulated and improved the daylight sensor system for safe production in all positions. Check now!

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are raw materials for dali dimmable led driver production?

Manufacturers always put a priority on the raw material sourcing, which makes stable product quality possible for years. The raw materials used for the manufacturing of dali dimmable led driver should be in strict line with the industry standards both in domestic and foreign countries. The performance of the materials will be even premier than the standard requirement so as to meet the certification requirements. Moreover, the manufacturers will follow the market trend to update their material lists rapidly. Customers will be informed through product descriptions about the composition. IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. has grown up as a dependable manufacturer, receiving many compliments from customers overseas. We have been specializing in the production of types of power amplifier. IPON focuses on providing a variety of power amplifier price for customers. The product features good sewing quality. The mature selvage workmanship makes the fabric tightly woven to prevent thread unraveling. Ideal for Any Lighting System. Our customers all praise its high purity. They use it in their manufacturing or construction industries to maximize the value of the product.IPON LED aims to promote exporting signal converters. Call now!

What properties are needed in dali led driver raw materials?

The properties needed in the raw materials depends on the different performance requirements of dali led driver. Generally, the raw materials shall always lead to a good result. It is important to understand what is significant for raw material properties, and how manufacturers can influence these factors if they are to achieve a reliable and correct quality. The raw material should meet the requirements of overseas technology. With years of continuous improvement, IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. is a famous supplier of wireless led drivers in the China market. We are now committed to going global. IPON focuses on providing a variety of dmx led driver for customers. Raised production technique: the production technique of IPON LED dmx driver is updated based on our rich production experience. It has evolved greatly over the past years. A Perfect Device for Lighting Control. This product features strong colorfastness. It has been checked under the dipping solvents, such as cleaning agents, water, and bleach, and the result shows no fading. Built for Better Lighting Control.The brand positioning of the IPON LED brand is to enable each team to serve customers with professional skills. Get info!

How much will it take for dali dimmable led driver materials?

The amount of cash spent on the creation of dali dimmable led driver determines the quality and performance of it. For instance, IPOIPON General Electric Industry Co.Ltd. always takes the cost into serious consideration to buying high-quality raw materials and goals to supply high cost-performance ratio merchandise. Raw materials for making it are well chosen, which may guarantee the superior functionality of high quality products. Except for attaching great value of materials' functionality, it also pays attention to the material cost, that can be important to make the product be of high cost-performance ratio. IPON General Electric Industry Co.Ltd. has grown up as a dependable manufacturer, receiving many compliments from customers overseas. We have been specializing in the production of daylight motion sensor. IPON focuses on providing a variety of signal converters for customers. The product features bacteria resistance. Its fabrics have been added with anti-bacterial fiber which is effective in restraining the reproduction of bacteria. Ideal for Any Lighting System. Customers say it is highly resistant to washing and burning sunlight. Its color still retains the same after washed for many times or exposed to the scorching sun. Solutions Beyond Illumination.We plan to become a global dmx dimmer exporter. Contact us!

How much will it cost for dali led driver production?

Cost of production is a large issue in the dali led driver company. It's a key affecting the earnings and profit. If the company partners care about it, they might consider the profit. When the producers concentrate on this, it's possible they get an aim to decrease it. A whole supply chain is obviously a means for the producers to decrease the prices. This really is a now a tendency in the business, and is a reason behind M&A. Since the establishment, IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. has been engaged in the production of DMX Analog Signal Converter. We have quickly expanded our operations globally. IPON focuses on providing a variety of phase cut dimming for customers. This product has a a good proportion. Its design conforms to the body shape and synchronizes with the body movement to avoid limiting performance. Ideal for Any Lighting System. Many of our customers say the product is smooth and soft. And it will not cause any skin irritation compared to a similar product in the market. We Drive Light!The brand positioning of the IPON LED brand is to enable each team to serve customers with professional skills. Inquire!