DALI Series dali driver China for Lighting control system

Product Information of IPON LED DALI Series dali driver China for Lighting control system

Company Advantages
1. The design of dali driver's structure is based on led driver dimmer featuring with led driver dimmer. Built for Better Lighting Control
2. This product shows the great benefit of effectively keeping people safe from germs. It totally offers a comfortable feet environment. A Smart Lighting Control Solution
3. The product is reliable in quality because it is produced and tested according to the requirements of widely recognized quality standards. Be Bright, Turn To IPON
4. The product is guaranteed to be superior in quality, stable in performance, and long in service life. Solutions Beyond Illumination
5. Regular performance checks have been implemented to ensure the high performance and reliable quality of the product. Ideal for Any Lighting System

10W 120/180/240/300mA*1ch CC DALI Driver

Model: IP1HMC-10D-0
Input Voltage: 220–240VAC
Output Power: 10W
Output Current: 120/180/240/300mA
Channels: 1

10W 120/180/240/300mA DALI Constant Current LED Dimming Driver IP1HMC-10D-0

IP1HMC-10D-0 is a 10W AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. EUP10D-1HMC-0 can be connected to DALI main controller or Touch DIM to a chieve a smooth dimming effect.

Product Features

• Single channel output, output current level selectable by DIP S.W.

• Meet DALI Protocol IEC 62386

• Support Touch-DIM function

• High efficiency up to 85%

• Built-in active PFC function

• Dimming effect smooth, no flicker

• Protections: Short circuit, over load, over temperature

• Suitable for indoor LED lighting application, such as down light, spotlights, panel light, and so on

Technical Parameter

Model		IP1HMC-10D-0
Output	Current	120mA	180mA	240mA	300mA
	Voltage	9-40VDC	9-40VDC	9-40VDC	9-33VDC
	Power	4.8W	7.2W	9.6W	9.9W
	Current accuracy	±5%
	No load output voltage	50VDC
	Output LF current ripple(&< 120 Hz)	＜3%
	Channels	1
Input	Voltage	220– 240VAC
	Frequency	50/60Hz
	Power factor	≥0.95@230VAC,full load
	Efficiency	85%@230VAC,full load
	THD	＜10%@230VAC, full load
	No-load Power Consumption	＜0.5W
	Current	0.06A max.@230VAC
	Inrush current	Cold start,18A(twidth=14us measured at 50% Ipeak) @230VAC
Protection	Short circuit	close output, recovers automaticallyafter fault removed
	Over load	When the output voltage is exceeded, the output current decreases and, recoversautomaticallywhen the load is reduced.
	Over temperature	Shut down the output, recovers automaticallywhen temp. back to normal.
Function	Dimming	DALI/Touch DIM
Others	Dimension	1504329 mm（LWH）
	G.W	125g
	Working temp.	-20℃ ~ 50℃
	Relative humidity	20~90% RH

Company Features
1. IPON General Electric Industry Co.Ltd. excels in manufacturing a broad range of products such as led driver dimmer. We are proud to boast rich production experience. IPON LED advances the development of technology to improve the quality of dali driver and improve product life.
2. The technology for dali driver IPON General Electric Industry Co.Ltd. mastered is advanced in China and even has approached internationally advanced status.
3. IPON LED Dimmable Drivers provides the latest technology to exceed customer and business needs. IPON General Electric Industry Co.Ltd. will do its best to create maximum convenience for customers! Get an offer!

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are raw materials for dali dimmable led driver production?

Manufacturers always put a priority on the raw material sourcing, which makes stable product quality possible for years. The raw materials used for the manufacturing of dali dimmable led driver should be in strict line with the industry standards both in domestic and foreign countries. The performance of the materials will be even premier than the standard requirement so as to meet the certification requirements. Moreover, the manufacturers will follow the market trend to update their material lists rapidly. Customers will be informed through product descriptions about the composition. IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. has grown up as a dependable manufacturer, receiving many compliments from customers overseas. We have been specializing in the production of types of power amplifier. IPON focuses on providing a variety of power amplifier price for customers. The product features good sewing quality. The mature selvage workmanship makes the fabric tightly woven to prevent thread unraveling. Ideal for Any Lighting System. Our customers all praise its high purity. They use it in their manufacturing or construction industries to maximize the value of the product.IPON LED aims to promote exporting signal converters. Call now!

What properties are needed in dali led driver raw materials?

The properties needed in the raw materials depends on the different performance requirements of dali led driver. Generally, the raw materials shall always lead to a good result. It is important to understand what is significant for raw material properties, and how manufacturers can influence these factors if they are to achieve a reliable and correct quality. The raw material should meet the requirements of overseas technology. With years of continuous improvement, IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. is a famous supplier of wireless led drivers in the China market. We are now committed to going global. IPON focuses on providing a variety of dmx led driver for customers. Raised production technique: the production technique of IPON LED dmx driver is updated based on our rich production experience. It has evolved greatly over the past years. A Perfect Device for Lighting Control. This product features strong colorfastness. It has been checked under the dipping solvents, such as cleaning agents, water, and bleach, and the result shows no fading. Built for Better Lighting Control.The brand positioning of the IPON LED brand is to enable each team to serve customers with professional skills. Get info!

How much will it take for dali dimmable led driver materials?

The amount of cash spent on the creation of dali dimmable led driver determines the quality and performance of it. For instance, IPOIPON General Electric Industry Co.Ltd. always takes the cost into serious consideration to buying high-quality raw materials and goals to supply high cost-performance ratio merchandise. Raw materials for making it are well chosen, which may guarantee the superior functionality of high quality products. Except for attaching great value of materials' functionality, it also pays attention to the material cost, that can be important to make the product be of high cost-performance ratio. IPON General Electric Industry Co.Ltd. has grown up as a dependable manufacturer, receiving many compliments from customers overseas. We have been specializing in the production of daylight motion sensor. IPON focuses on providing a variety of signal converters for customers. The product features bacteria resistance. Its fabrics have been added with anti-bacterial fiber which is effective in restraining the reproduction of bacteria. Ideal for Any Lighting System. Customers say it is highly resistant to washing and burning sunlight. Its color still retains the same after washed for many times or exposed to the scorching sun. Solutions Beyond Illumination.We plan to become a global dmx dimmer exporter. Contact us!

How much will it cost for dali led driver production?

Cost of production is a large issue in the dali led driver company. It's a key affecting the earnings and profit. If the company partners care about it, they might consider the profit. When the producers concentrate on this, it's possible they get an aim to decrease it. A whole supply chain is obviously a means for the producers to decrease the prices. This really is a now a tendency in the business, and is a reason behind M&A. Since the establishment, IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. has been engaged in the production of DMX Analog Signal Converter. We have quickly expanded our operations globally. IPON focuses on providing a variety of phase cut dimming for customers. This product has a a good proportion. Its design conforms to the body shape and synchronizes with the body movement to avoid limiting performance. Ideal for Any Lighting System. Many of our customers say the product is smooth and soft. And it will not cause any skin irritation compared to a similar product in the market. We Drive Light!The brand positioning of the IPON LED brand is to enable each team to serve customers with professional skills. Inquire!