Product Information of IPON LED dali reg dimmer China manufacturers for Lighting control system

Company Advantages
1. The design of IPON LED expresses attraction and deep expression to the customers. Solutions Beyond Illumination
2. This product has lower emissions of harmful gases into the environment. It can play a significant role in reducing carbon footprint. A Perfect Device for Lighting Control
3. It is endowed with important fabric properties for maintaining thermal comforts, such as air permeability, water or moisture (vapor) permeability/transportation and heat transmission.
4. The product poses no hazards during overloading. It is equipped with high-performance circuit breakers to provide protection from overloading. A Smart Lighting Control Solution
5. The product is not prone to be affected by moisture or water. It is treated with good paint on the surface which effectively prevents any moisture content from getting inside its heart board. Choose IPON, Choose A Brighter Future

700mA*1ch CC DALI Driver**

- Model: IPL1WMC-20D-0
- Input Voltage: 100–240VAC
- Output Power: 20W
- Output Current: 350/500/700mA
- Channels: 1

20W 350/500/700mA*1ch Constant Current DALI Driver IPL1WMC-20D-0

IPL1WMC-20D-0 is a 20W AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. IPL1WMC-20D-0 can be connected to DALI main controller or Touch DIM to achieve a smooth dimming effect.

Feature

1. Single channel output, output current level selectable by DIP S.W.

2. Meet DALI protocol IEC 62386

3. Support Touch DIM function

4. Wide input voltage of 100VAC ~ 240VAC

5. High efficiency up to 83%

6. Built-in active PFC function

7. Liner dimming mode，dimming effect smooth, no flicker

8. Protections: Over load, short circuit, over voltage

9. Suitable for indoor LED lighting application, such as down light, panel light, tri-proof light, and so on

Technical Parameter

Product Name		20W 350/500/700mA dali constant current led driver
Model		IPL1WMC-20D-0
Output	Current	350mA	500mA	700mA
	Voltage	9-58VDC	9-40VDC	9-29VDC
	Power	20.3W	20W	20.3W
	Current accuracy	±5%
	Maximum output voltage	55VDC
	LF current ripple（＜120Hz）	＜3%
	Channels	1
Input	Voltage	100– 240VAC
	Frequency	50/60Hz
	Power factor	≥0.9,@230VAC,75%-100% of load
	THD	＜15%@230VAC, 100% load
	Efficiency	83%@230VAC, 100% load
	Current	0.12Amax@230VAC
	Inrush current	Cold start,28A(t_width=30us measured at 50% I_peak) @230VAC
Protection	Short circuit	Close output，recovers automatically after fault removed
	Over voltage	Limit the output voltage
	Over load	Above 110%~150% of rated power, limit output voltage
Function	Dimming	DALI /Touch DIM
Others	Dimension	2803021 mm（LWH）
	G.W	230g
	Working temp.	-20℃ ~ 40℃
	Relative humidity	20~90% RH

Company Features
1. By the rigorous expansion of dali reg dimmer , IPON LED has the ability to provide high quality and finest product. By applying core technologies, IPON LED has achieved great success in solving problems in the manufacturing process.
2. Optimizing and utilizing advanced technology is the only way for IPON LED to break the led driver model industry bottleneck.
3. IPON LED Dimmable Drivers provides the latest technology to exceed customer and business needs. IPON General Electric Industry Co.Ltd. will always pay attention to the industrial style and urge innovation spirits. Get more info!

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are raw materials for dali dimmable led driver production?

Manufacturers always put a priority on the raw material sourcing, which makes stable product quality possible for years. The raw materials used for the manufacturing of dali dimmable led driver should be in strict line with the industry standards both in domestic and foreign countries. The performance of the materials will be even premier than the standard requirement so as to meet the certification requirements. Moreover, the manufacturers will follow the market trend to update their material lists rapidly. Customers will be informed through product descriptions about the composition. IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. has grown up as a dependable manufacturer, receiving many compliments from customers overseas. We have been specializing in the production of types of power amplifier. IPON focuses on providing a variety of power amplifier price for customers. The product features good sewing quality. The mature selvage workmanship makes the fabric tightly woven to prevent thread unraveling. Ideal for Any Lighting System. Our customers all praise its high purity. They use it in their manufacturing or construction industries to maximize the value of the product.IPON LED aims to promote exporting signal converters. Call now!

What properties are needed in dali led driver raw materials?

The properties needed in the raw materials depends on the different performance requirements of dali led driver. Generally, the raw materials shall always lead to a good result. It is important to understand what is significant for raw material properties, and how manufacturers can influence these factors if they are to achieve a reliable and correct quality. The raw material should meet the requirements of overseas technology. With years of continuous improvement, IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. is a famous supplier of wireless led drivers in the China market. We are now committed to going global. IPON focuses on providing a variety of dmx led driver for customers. Raised production technique: the production technique of IPON LED dmx driver is updated based on our rich production experience. It has evolved greatly over the past years. A Perfect Device for Lighting Control. This product features strong colorfastness. It has been checked under the dipping solvents, such as cleaning agents, water, and bleach, and the result shows no fading. Built for Better Lighting Control.The brand positioning of the IPON LED brand is to enable each team to serve customers with professional skills. Get info!

How much will it take for dali dimmable led driver materials?

The amount of cash spent on the creation of dali dimmable led driver determines the quality and performance of it. For instance, IPOIPON General Electric Industry Co.Ltd. always takes the cost into serious consideration to buying high-quality raw materials and goals to supply high cost-performance ratio merchandise. Raw materials for making it are well chosen, which may guarantee the superior functionality of high quality products. Except for attaching great value of materials' functionality, it also pays attention to the material cost, that can be important to make the product be of high cost-performance ratio. IPON General Electric Industry Co.Ltd. has grown up as a dependable manufacturer, receiving many compliments from customers overseas. We have been specializing in the production of daylight motion sensor. IPON focuses on providing a variety of signal converters for customers. The product features bacteria resistance. Its fabrics have been added with anti-bacterial fiber which is effective in restraining the reproduction of bacteria. Ideal for Any Lighting System. Customers say it is highly resistant to washing and burning sunlight. Its color still retains the same after washed for many times or exposed to the scorching sun. Solutions Beyond Illumination.We plan to become a global dmx dimmer exporter. Contact us!

How much will it cost for dali led driver production?

Cost of production is a large issue in the dali led driver company. It's a key affecting the earnings and profit. If the company partners care about it, they might consider the profit. When the producers concentrate on this, it's possible they get an aim to decrease it. A whole supply chain is obviously a means for the producers to decrease the prices. This really is a now a tendency in the business, and is a reason behind M&A. Since the establishment, IPOIPON General Electric Industry Co.Ltd. General Electric Industry Co.Ltd. has been engaged in the production of DMX Analog Signal Converter. We have quickly expanded our operations globally. IPON focuses on providing a variety of phase cut dimming for customers. This product has a a good proportion. Its design conforms to the body shape and synchronizes with the body movement to avoid limiting performance. Ideal for Any Lighting System. Many of our customers say the product is smooth and soft. And it will not cause any skin irritation compared to a similar product in the market. We Drive Light!The brand positioning of the IPON LED brand is to enable each team to serve customers with professional skills. Inquire!