- Model: IP1HMC-40D-0
- Input Voltage: 220-240VAC
- Output Power: 40W
- Output Current: 850~1200mA
- Channels: 1
40W 850/900/950/1000/1050/1100/1150/1200mA Constant Current DALI Driver IP1HMC-40D-0
IP1HMC-40D-0 is a constant output mode LED driver. The output current can be easily set via DIP switch, IP1HMC-40D-0 can be connected to DALI master or Touch DIM to achieve a smooth dimming effect.
Features
1. Single channel output, output current level selectable by DIP S.W.
2. Meet DALI Protocol IEC 62386 ·Support Touch-DIM function
3. Support Touch-DIM function
4. High input voltage of 220VAC ~ 240VAC
5. High efficiency up to 88%
6. Built-in active PFC function
7. Dimming effect smooth, no flicker
8. Protections: Short circuit, over load, over temperature
9. Suitable for indoor LED lighting application, such as down light, panel light, and so on
Technical Parameters
Model | IP1HMC-40D-0 | ||||
Output | Current | 850mA | 900mA | 950mA | 1000mA |
Voltage | 9-45VDC | 9-44VDC | 9-42VDC | 9-40VDC | |
Power | 38.25W | 39.6W | 39.9W | 40W | |
Current | 1050mA | 1100mA | 1150mA | 1200mA | |
Voltage | 9-38VDC | 9-36VDC | 9-35VDC | 9-33VDC | |
Power | 39.9W | 39.6W | 49.25W | 39.6W | |
Current accuracy | ±5% | ||||
Maximum output voltage | 55VDC | ||||
Output LF current ripple(< 120 Hz) | 3% | ||||
Channels | 1 | ||||
Input | Voltage | 220VAC – 240VAC | |||
Frequency | 50/60Hz | ||||
Power Factor | ≥ 0.95@230VAC, full load | ||||
Efficiency | 88%@230VAC, full load | ||||
THD | <10%@230VAC, full load | ||||
Standby power | <0.5W | ||||
Current | 0.23A max@230VAC | ||||
Inrush current | Cold start,40A(twidth=12.8us measured at 50% Ipeak) @230VAC | ||||
Protection | Short circuit | Close output, recovers automatically after fault removed | |||
Over load | When the output voltage is exceeded, the output current decreases and, recovers automatically when the load is reduced. | ||||
Over temperature | Shut down the output, recovers automatically when temp. back to normal. | ||||
Function | Dimming | DALI/TouchDIM | |||
Others | Dimension | 137 *82*31 mm(L*W*H) | |||
G.W | 225g | ||||
Working temp. | -20℃ ~ 50℃ | ||||
Relative humidity | 20~90% RH |
1. Sample of nema 23 stepper motor driver leadshine stepper motor driver delivery in 3 Days.
2. Mass production of nema 23 stepper motor driver leadshine stepper motor driver Delivery Time 25 Days.
3.Have strict quality management system.
4. For More information, please contact us.
5.One year warranty and lifelong repair.
Copyright © 1998 ~ 2024 IPON General Electric Industry Co.Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.