DALI-BUS To DALI Gateway

Model: IP-G-DALI
Input voltage: Supplied via DALI-BUS bus
Communication protocol: DALI-BUS
The number of DALI equipment: 64
The number of dry contact: 1

DALI-BUS To DALI Gateway IP-G-DALI

In the DALI-BUS system, the user can control the equipment complying with DALI standard protocol via IP-G-DALI gateway. The user can assign（including reassign, extent allocation） the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance.

Product Features

• Assign（including reassign, extent allocation） the address for DALI equipment

• In IP-BUS mode, can update firmware remotely via DALI-BUS interface

• Support IP-BUS function to the DALI command

• Set parameter for DALI equipment, and, can be used with the DALI sensor, DALI panel

• Support DALI-BUS to DALI command function

• Supplied via DALI-BUS bus, without external power supply

• The standard 35mm din rail, convenient installation

Technical Parameter