High repurchase rate led driver and dimmer Suppliers for Lighting adjustment

15W 280/350/450mA CC DALI&0-10V Driver

Model: IP1WMC-15AD-0
Output Current: 280/350/450mA
Output Voltage: 9-40VDC
Power: 15W
Current Accuracy: ±5%
Maximum Output Voltage: 50VDC
Channels: 1
Input Voltage: 100–240VAC
Frequency: 50/60Hz

15W 280/350/450mA DALI&0-10V Constant Current LED Driver IP1WMC-15AD-0

IP1WMC-15AD-0 is a wide input voltage, constant current mode output LED driver. The output current can be easily set via the DIP dial switch. IP1WMC-15AD-0 complies with DALI standard protocol IEC 62386,and provides multiple dimming function (DALI,0-10V active signal ,PWM, adjustable resistance, and Touch DIM) to achieve a smooth dimming effect.

Product Features

• Single channel output, output current level selectable by DIP S.W.

• Support a variety of dimming mode（DALI / 0-10V active signal / adjustable resistance / PWM / Touch DIM）

• High range of input voltage 100VAC ~ 240VAC

• High efficiency up to 82%

• Built-in active PFC function

• Dimming effect smooth, no flicker

• Protections: Short circuit.

• Suitable for indoor LED lighting application, such as down light, panel light, and so on

Technical Parameter

Product Name		15W 280/350/450mA DALI&0-10V Constant Current LED Driver
Model		IP1WMC-15AD-0
Output	Current	280mA	350mA	450mA
	Voltage	9-40VDC	9-40VDC	9-33VDC
	Power	11.2W	14W	14.85W
	Current Accuracy	±5%
	Maximum Output Voltage	50VDC
	Output LF Current Ripple(< 120 Hz)	＜3%
	Channels	1
Input	Voltage	100– 240VAC
	Frequency	50/60Hz
	Power Factor（Type）	≥0.9@230VAC，full load
	Efficiency(Typ)	82%@230VAC，full load
	Current	0.1Amax@230VAC
	Inrush Current	15A@230VAC
Protection	Short circuit	Close output，recovers automatically after fault removed
Function	Dimming	DALI/1-10V active signal/adjustable resistance/PWM/Touch DIM
	Priority order	DALI > (1-10V active signal/adjustable resistance/PWM) > Touch DIM
Others	Dimension	1425128 mm(LWH)
	G.W.	130g
	Working temp.	-20℃ ~ 40℃
	Relative humidity	20~90% RH

z******f

Different cutting-edge technologies have been used in IPON LED led driver and dimmer. It is produced adopting intelligent control, sensing, and servo-drive technology. The product is assembled with AB glue which improves high-temperature resistance

l******r

The production of IPON LED led driver and dimmer meets environmental standards. For example, the paints and solvents used as surface coatings are dealt with properly in accordance with environmental regulations. The product is assembled with AB glue which improves high-temperature resistance

r******q

IPON LED led driver and dimmer is of scientific design. Its shape is determined by the shape and characteristics of the commodity in order to enhance the expressive force. It features outstanding workmanship that proves to be delicate

h******c

IPON LED led driver and dimmer is manufactured in line with high-quality standards. It is produced with excellent anti-corrosive, anti-static, water-resistant, and dust-proof performance. Its manufacturing is fully supported by staff with years of experience in the industry

i******j

The design considerations of IPON LED led driver and dimmer cover the following aspects: static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. It is lead free, PCP free, and cadmium free

n******s

The product is efficient at keeping out most sounds. The thick timber used in it has high density which can prevent the noise from getting in. Sterilization procedure is adopted to reduce the possibility of infection

Product Message

*Name

Phone

*E-mail

*Content