High-quality nfc programmble drivers manufacturer for Lighting control system

50W Constant Current Waterproof LED Driver

Model: IP1W1050C-C50XY-0MWWZ
Input Voltage: 100-277VAC
Output Power: 50W

50W Constant Current Waterproof LED Driver IP1W1050C-C50XY-0MWWZ

IP1W1050C-C50XY-0MWWZ series are constant current mode output LED driver. The series of products are suitable for outdoor because of IP67 and great surge immunity. The user can select corresponding model according to the dimming method and market requirements, and can modify the output current via NFC programmer.

Product Features

• Supply voltage: 100-277VAC or 141-391VDC

• Great surge immunity 10kV

• -60℃ cold ambient startup (Optional)

• 100,000Hour life @ Tc=75C

• 7 year warranty @ Tc<=80C

• AirsetTM NFC programmability

• +/-2% output current accuracy (Programmable model)

• 0-10V/PWM/DALI dimmable (Model depending)

• Dim off with 0.5W standby (Model depending)

• 12V 300mA auxiliary power to power controllers and fans (Model depending)

• Input over voltage protection (optional)

• CB/CCC SELV output

• Safety according to EN 61347-1, 61347-2-3,61347-2-13, 62384

• Application: strip lights, landscape lights, bay lights, street lights, flood lights

MODEL LIST

Model Number	Input Voltage Range	Output Power	Output Voltage	Full Power Settable Current Min	Full Power Settable Current Max	Certification
IP1W1050C-C50XY-0MWWZ	100-277VAC	50W	29-71VDC	700mA	1050mA	FCC /CCC/CB
IP1W1400C-C50XY-0MWWZ	100-277VAC	50W	21-48VDC	1050mA	1400mA	FCC /CCC/CB
IP1W2100C-C50XY-0MWWZ	100-277VAC	50W	14-36VDC	1400mA	2100mA	FCC /CCC/CB

XY=	Dimming method	Programmable	12Vaux	Dim-off	Z=
NN	—	—	—	—	U	UL cable with ground wire
AN	0-10V	—	—	—	S	VDE cable/Class I
FR	Time	√	—	—
AR	0-10V	√	—	—
ER	0-10V/PWM/Time	√	√	√
DR	DALI	√	—	√

Technical Parameter

Model		IP1W1050C-C50XY-0MWWZ
Output	Channels	1
	Current accuracy	±2%Io for programmable model, ±5%Io for non-programmable model
	Ripple current	Ip-p:5%Io max
	Output overshoot	10% Io max & LED Load
Input	Voltage	100VAC – 277VAC**
	Frequency	50/60Hz
	Current	0.5Amax@120VAC & Full-Load, 0.25Amax@220VAC & Full-Load
	Inrush current	65A peak, 1.2ms duration,<0.25A2s@230VAC, Cold Start 70A peak, 1.3ms duration,<0. 5A2s@277VAC, Cold Start
	PF	>0.9@60-100%load, refer to PF vs. Load curve
	THD	<15%@60-100%load, refer to THD vs. Load curve
	Leakage current	1mA max @277VAC 60Hz, UL8750, 0.75mAmax @220VAC 50Hz, IEC61347-1
Protection	Input under voltage	Shut down and auto-restart
	Input over voltage	*Optional: Shutdown @320VAC
	Output over voltage	120% Vomax, typ.
	Short circuit	Auto recovery. The output recovers when short is removed.
	Over temperature	Lower the output current when Tc≧105±10℃; Auto Recovery When Tc≦70±10℃
Others	Setup time	1.2s max.
	Surge protection	Line to line 4kV, line to ground 10kV, IEC 61000-4-5
	Auxiliary power (Vaux)	12V+/-5%, 300mA max
	Operating temperature	-40℃～+90℃；10%RH～100%RH
	Storage temperature	-40℃～+85℃； 5%RH～100%RH
	MTBF	≥320,000 hours, 50℃ case temperature (MIL-HDBK-217F)
	Lifetime	≥100,000 hours, 75℃ case temperature, refer to life vs. Tc curve
	Case temperature	90℃ max, marked in the Tc point of label
	Dimensions	5.16x2.66x1.32 by inch (body), 6.22x2.66x1.32 by inch (endcaps included)
	Dimensions	131.0x67.5x33.5 by mm (body), 158.0x67.5x33.5 by mm (endcaps included)
	Net weight	600g
	Packing	20pcs/Carton/12.5kg, 500x320x315mm

Notes: Unless specified, all the test results are measured in 25℃ room temperature.

* marked items are optional and contact with sales people to get the functions.

DIMMING

Parameter	Min.	Typ.	Max.
Vdim sourcing current	200uA	300uA	450uA
Vdim allowed input voltage	-20V		20V
0-10V dimming range	10%(Vdim=1V)	Linear	100%(Vdim=9~10V)
PWM dimming range	10% Duty=10%)	Linear	100%(Duty=90-100%)
Dim off threshold		0.5V or 5%	0.6V or 6%
Dim on threshold	0.6V or 6%	0.7V or 7%
PWM high	3V		10V
PWM low	0V		0.6V
PWM frequency	300Hz		2KHZ
External PWM controller current sinking capability	300uA
DA1,DA2 high level	9.5	16	22.5
DA1,DA2 low level	-6.5	0	6.5
DA1,DA2 current	0		2mA

y******x

Different cutting-edge technologies have been used in IPON LED nfc programmble drivers. It is produced adopting intelligent control, sensing, and servo-drive technology. The product stands out among suchlike products with reasonable price

z******k

The production of IPON LED nfc programmble drivers meets environmental standards. For example, the paints and solvents used as surface coatings are dealt with properly in accordance with environmental regulations. The product is made of high-quality materials that pass TUV and SGS testing

m******s

IPON LED nfc programmble drivers is of scientific design. Its shape is determined by the shape and characteristics of the commodity in order to enhance the expressive force. The product is made of high-quality materials that pass TUV and SGS testing

j******t

IPON LED nfc programmble drivers is manufactured in line with high-quality standards. It is produced with excellent anti-corrosive, anti-static, water-resistant, and dust-proof performance. Its size and color can be both customized in line with personalization demands

a******w

The design considerations of IPON LED nfc programmble drivers cover the following aspects: static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. Its size and color can be both customized in line with personalization demands

p******n

The product is efficient at keeping out most sounds. The thick timber used in it has high density which can prevent the noise from getting in. The cleaning of the product is hassle free

Product Message

*Name

Phone

*E-mail

*Content