**30W 550~900mA*1ch CC 1-10V Driver**

- Model: IP1HMC-30A-1
- Input Voltage: 220-240VAC
- Output Power: 30W
- Output Current: 550~900mA
- Output Channels: 1

30W 550/600/650/700/750/800/850/900mA Constant Current 1-10V Driver

IP1HMC-30A-1 is a constant current output mode LED driver. The output current can be easily set via DIP switch, and the driver can be adjusted by the external 1-10VDC active signal, PWM signal , or adjustable resistance to achieve the smooth dimming effect.

Feature

1. Single channel output, output current level selectable by DIP S.W.
2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM)
3. High input voltage of 220VAC ~ 240VAC
4. High efficiency up to 87%
5. Built-in active PFC function
6. 100% output when no dimming signal input, can be used as normal power supply
7. Dimming effect smooth, no flicker
8. Protections: Short circuit, Over Load, Over Temperature
9. Suitable for indoor LED lighting application, such as down light, spotlights, panel light, and so on.

Technical Parameter

Model		IP1HMC-30A-1
Output	Current	550mA	600mA	650mA	700mA
	Voltage	9-45VDC	9-45VDC	9-45VDC	9-43VDC
	Power	24.75W	27W	29.25W	30.1W
	Current	750mA	800mA	850mA	900mA
	Voltage	9-40VDC	9-38VDC	9-35VDC	9-34VDC
	Power	30W	30.4W	29.75W	30.6W
	Current accuracy	±5%
	No load output voltage	50VDC
	Output LF current ripple(< 120 Hz)	＜3%
	Channels	1
Input	Voltage	220– 240VAC
	Frequency	50/60Hz
	Current	0.17Amax@230VAC
	No-load power consumption	＜0.5W
	Power factor	≥0.95@230VAC,full load
	THD	＜10%@230VAC,full load
	Efficiency	87%@230VAC,full load
	Inrush current	Cold start,28A(t_width=30us measured at 50% I_peak) @230VAC
Protection	Short circuit	after fault removed Close output, the output current recovers automatically
	Over load	When the output voltage is exceeded, decreases and,recovers automatically when the load is reduced.
	Over temperature	Shut down the output, recovers automatically when temp. back to normal.
Function	Dimming	1-10V active signal, adjustable resistance, PWM
Others	Dimension	1425128 mm（LWH）
	G.W	155g
	Working temp.	-20℃ ~ 50℃
	Relative humidity	20~90% RH

r******j

Different cutting-edge technologies have been used in IPON LED led driver cost. It is produced adopting intelligent control, sensing, and servo-drive technology. It features outstanding workmanship that proves to be delicate

l******r

The production of IPON LED led driver cost meets environmental standards. For example, the paints and solvents used as surface coatings are dealt with properly in accordance with environmental regulations. Its manufacturing is fully supported by staff with years of experience in the industry

x******n

IPON LED led driver cost is of scientific design. Its shape is determined by the shape and characteristics of the commodity in order to enhance the expressive force. The product comes with a stylish and fashionable design

m******c

IPON LED led driver cost is manufactured in line with high-quality standards. It is produced with excellent anti-corrosive, anti-static, water-resistant, and dust-proof performance. The product is assembled with AB glue which improves high-temperature resistance

a******k

The design considerations of IPON LED led driver cost cover the following aspects: static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. The product seizes the market share in over 20 countries, mainly in the USA, UK, Korea, and Russia

p******x

The product is efficient at keeping out most sounds. The thick timber used in it has high density which can prevent the noise from getting in. Its size and color can be both customized in line with personalization demands

Product Message

*Name

Phone

*E-mail

*Content

high quality led driver cost supplier for Lighting control system

30W 550~900mA*1ch CC 1-10V Driver

**30W 550~900mA*1ch CC 1-10V Driver**