Product Details

IPON's Led Driver Manufacturers is of excellent quality, which is reflected in the details.Under the guidance of market, IPON constantly strives for innovation. Led Driver Manufacturers has reliable quality, stable performance, good design, and great practicality.

Company Advantages
1. IPON LED led driver quality is manufactured by first-rate raw materials from the leading suppliers. The production of the raw materials strictly adheres to international quality standards.
2. The product is highly efficient in energy saving. Driven 100% by solar energy, it does not need any electricity supplied by the power grid.
3. The product is not prone to shrinkage after washing. During the scutching and squeezing processes, the tension of the fabric is strictly controlled.
4. People are not likely to see defects on this product, no matter they are the spots, untrimmed threads, or poor quality seaming.

**75W 12VDC 6.2A*1ch Waterproof CV 1-10V Driver**

- Model: IP1H12V-75A-1WP
- Input Voltage: 220-240VAC
- Output Power: 75W
- Output Voltage: 12VDC
- Output Current: 6.2A
- Channels: 1

75W 12VDC waterproof 1-10V constant voltage dimmable driver

IP1H12V-75A-1WP is a constant voltage mode output LED driver. This driver can be controlled by external signal (1-10V active signal, adjustable resistance and PWM signal) to achieve a smooth dimming effect.

Feature

1. Single channel constant voltage output,6.2A Max

2. Support 3-in-1 dimming mode( 1-10V active signal, adjustable resistance and PWM signal)

3. High input voltage of 220VAC ~ 240VAC

4. Dimming range of 1-100%, and dimming effect smooth, no flicker

5. 100% output when no dimming signal input, can be used as normal power supply

6. Over load protection; over voltage protection; short circuit protection；Over temperature

7. IP65, suitable for outdoor LED lighting application

Technical Parameter

Product Name		75W 12VDC 1-10V waterproof constant voltage dimmable driver
Item		IP1H12V-75A-1WP
Output	Voltage	12VDC
	Current	6.2A
	Rated Power	74.4W
	Voltage Tolerance	±3%
	R & N(max)	120mVp‐p
	Channels	1
Input	Voltage Range	220 – 240VAC
	Frequency	50/60Hz
	Efficiency(Type)	>86%@230VAC, full load
	Current	0.9A max@230VAC
	Inrush current	Cold start 40A@230VAC
Protection	Over Voltage	Hiccup, recovers after fault condition is removed
	Over Load	Hiccup, recovers after fault condition is removed
	Short Circuit	Hiccup, recovers after fault condition is removed
	Over Temperature	Shut down and auto-restart after normal temperature
Function	Dimming	1-10V active signal, adjustable resistance and PWM signal
Others	Dimension	221(L)63(W)40(H)mm
	G.W.(g)	880g
	Packing size	324244229mm(LWH), 20Pcs/Carton
	IP rating	IP65
	Working Temp	‐20℃ ‐50℃
	Relative Humidity	20~90%RH

Company Features
1. IPON General Electric Industry Co.Ltd. has created a renowned brand with professionalism.
2. Our ISO certified factory is equipped with state-of-the-art equipment and highly qualified engineers. Almost every aspect of the factory operation is covered under an industrial quality system.
3. We are environmentally responsible. We continuously improve our environmental impact by minimizing discharges to air, water, and land, reducing or eliminating waste, and minimizing energy consumption. We follow the tenet of 'Keep Improving and Pursue Excellence'. We absorb in international advanced technology through constant learning and communication with peers, aiming to improve ourself. Our ultimate goal is to achieve lean production which reduces waste across the board. We try to streamline the processes and maximize efficiency, aiming to control the production scrap to a low amount. We are introducing new production lines with low energy consumption and less emission. These environmental-friendly manufacturing facilities can effectively reduce negative environmental impact.

v******g

The safety of IPON LED led driver quality has been guaranteed. It has been tested in terms of biocompatibility and chemical resistant to corrosive solutions.

s******l

The manufacture of IPON LED constant voltage led driver involves several stages: 3D design, cutting, forming, surface treatments, biocompatibility testing, and assembly.

g******l

Typical parameters of IPON LED led driver quality being measured include flexure, tension, compression, peel strength, adhesive/bond strength, puncture, insertion/extraction and sliding of pistons.

a******v

IPON LED led driver quality has been strictly tested. It has passed through the environmental testing for humidity, vibration, susceptibility, drop, bump and shock.

d******k

The manufacture of IPON LED led driver quality involves the following stages: medical material and processes specification, vendor selection, detailed part design, software fine-tuning and testing, failure mode analysis, and tolerance analysis.

j******c

IPON General Electric Industry Co.Ltd. Strictly control costs in product procurement, production, processing, and logistics, practice strict savings, eliminate waste, and strive to reduce production costs, so that the produced led driver quality has a price advantage compared with similar products.

Product Message

*Name

Phone

*E-mail

*Content

high quality constant voltage led driver China for Lighting adjustment

75W 12VDC 6.2A*1ch Waterproof CV 1-10V Driver

**75W 12VDC 6.2A*1ch Waterproof CV 1-10V Driver**