DALI Series driver led in China for Lighting adjustment

Latest products

ZigBee HA1.2 gateway IP735-Z-IA-HGW

Project Case -5

Project Case 2

SLIM NEON TUBE FLOOR OR WALL LAMP IN FULL COLOURS H:1370MM

Product Information
Feedback

Company Advantages
1. IPON LED mains dimmable led drivers has passed the necessary tests required by the industry. These tests are slip resistance testing, structural stability testing, tear strength testing, and thermal comfort testing. To Control Lights. To Protect Lights
2. Many of our customers appreciate that it is highly resistant to corrosion even it is applied in the humid environment. We Drive Light
3. The latest idea of its mains dimmable led drivers combines the advanced technology and fashionable trend together. Choose IPON, Choose A Brighter Future
4. Our driver led has been applied to mains dimmable led drivers . It application shows that it is provided with dali dimming driver. Ideal for Any Lighting System

10W 120/180/240/300mA*1ch CC DALI Driver

Model: IP1HMC-10D-0
Input Voltage: 220–240VAC
Output Power: 10W
Output Current: 120/180/240/300mA
Channels: 1

10W 120/180/240/300mA DALI Constant Current LED Dimming Driver IP1HMC-10D-0

IP1HMC-10D-0 is a 10W AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. EUP10D-1HMC-0 can be connected to DALI main controller or Touch DIM to a chieve a smooth dimming effect.

Product Features

• Single channel output, output current level selectable by DIP S.W.

• Meet DALI Protocol IEC 62386

• Support Touch-DIM function

• High efficiency up to 85%

• Built-in active PFC function

• Dimming effect smooth, no flicker

• Protections: Short circuit, over load, over temperature

• Suitable for indoor LED lighting application, such as down light, spotlights, panel light, and so on

Technical Parameter

Model		IP1HMC-10D-0
Output	Current	120mA	180mA	240mA	300mA
	Voltage	9-40VDC	9-40VDC	9-40VDC	9-33VDC
	Power	4.8W	7.2W	9.6W	9.9W
	Current accuracy	±5%
	No load output voltage	50VDC
	Output LF current ripple(&< 120 Hz)	＜3%
	Channels	1
Input	Voltage	220– 240VAC
	Frequency	50/60Hz
	Power factor	≥0.95@230VAC,full load
	Efficiency	85%@230VAC,full load
	THD	＜10%@230VAC, full load
	No-load Power Consumption	＜0.5W
	Current	0.06A max.@230VAC
	Inrush current	Cold start,18A(twidth=14us measured at 50% Ipeak) @230VAC
Protection	Short circuit	close output, recovers automaticallyafter fault removed
	Over load	When the output voltage is exceeded, the output current decreases and, recoversautomaticallywhen the load is reduced.
	Over temperature	Shut down the output, recovers automaticallywhen temp. back to normal.
Function	Dimming	DALI/Touch DIM
Others	Dimension	1504329 mm（LWH）
	G.W	125g
	Working temp.	-20℃ ~ 50℃
	Relative humidity	20~90% RH

Company Features
1. Our factory houses a series of advanced production facilities, including materials processing machines, testing machines, and assembly machines. This means that we can maintain our continuous and stable productivity.
2. We will persistently improve the quality of service provided by each staff in IPON General Electric Industry Co.Ltd. . Check now!

m******b

[企业简称] closely follows the development trend of the industry, and the dali dimming driver produced is non-toxic, tasteless, environmentally friendly, and of high quality, and is highly favored in the market.

c******q

dali dimming driverHigh-quality material selection, high quality, high strength, high ductility, good water resistance and other advantages.

t******t

dali dimming driver The color is full and bright, with a strong sense of layering. It will form a high-strength, high-durability film layer when applied on the base surface of the building, making the wall surface resistant to washing and lasting clean and bright.

q******h

mains dimmable led drivers Good adhesion, good flexibility, long service life, wide application range, can be applied to exterior walls, roofs, kitchens, bathrooms, balconies, pools and other places.

c******j

driver led It is made of green environmental protection materials, with strong adhesion and permeability, which can protect and decorate building walls well.

t******r

The product has the advantages of great toughness. It can be twisted, bent or stretched under high stress before rupture. Integrated continuously cutting design is very stable and effective

Product Message

*Name

Phone

*E-mail

*Content