Company Advantages
1. The quality of IPON LED dali led dimmer is verified. It is tested in terms of specifications, functions, and safety with relevant standards such as EN 581, EN1728, and EN22520.
2. The product features overloading protection. When the circuit breaks down and the return circuit current increases, the resistance of restricting overloading protection thermistor goes up sharply for being warm, until the circuit is cut off.
3. The product is not prone to fracturing caused by expansion. The materials used in it feature low water absorption, which prevents water or moisture from entering into the materials.
4. IPON General Electric Industry Co.Ltd. always provides dimmable led driver  with good price and thoughtful service.
5. In IPON General Electric Industry Co.Ltd. customers can send us your outside cartons design for our customization.

20W 350/500/700mA*1ch CC DALI Driver

- Model:  IPL1WMC-20D-0
- Input Voltage: 100–240VAC
- Output Power: 20W
- Output Current: 350/500/700mA
- Channels: 1

 

20W 350/500/700mA*1ch Constant Current DALI Driver IPL1WMC-20D-0

IPL1WMC-20D-0 is a 20W AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. IPL1WMC-20D-0 can be connected to DALI main controller or Touch DIM to achieve a smooth dimming effect.

 

Feature

1. Single channel output, output current level selectable by DIP S.W.

2. Meet DALI protocol IEC 62386

3. Support Touch DIM function

4. Wide input voltage of 100VAC ~ 240VAC

5. High efficiency up to 83%

6. Built-in active PFC function

7. Liner dimming mode，dimming effect smooth, no flicker

8. Protections: Over load, short circuit, over voltage

9. Suitable for indoor LED lighting application, such as down light, panel light, tri-proof light, and so on

 

Technical Parameter

Company Features
1. IPON General Electric Industry Co.Ltd. ​​is a manufacturer that specializes in producing dimmable led driver .
2. dali led driver is widely recognized for its high quality.
3. We adopt eco-friendly manufacturing approach. We try to produce products that are made as little as possible from harmful chemicals and toxic compounds, so as to eliminate the harmful emissions to the environment. We aim to win the markets by quality. We will always maintain quality superiority by enhancing R&D ability and adopting international cutting-edge manufacturing technologies. We are committed to promoting our sustainable development. We constantly enhance the environmental management system to meet the requirements of our environmental awareness.