- Model: IP1HMC-50A-1
- Input Voltage: 220–240VAC
- Output Power: 50W
- Output Current: 1050~1400mA
- Channels: 1
50W 1050/1100/1150/1200/1250/1300/1350/1400mA Constant Current 1-10V Driver
IP1HMC-50A-1 is a constant output mode LED driver. The output current can be easily set via DIP switch, and the driver can be adjusted by the external 1-10VDC active signal, PWM signal , or adjustable resistance to achieve the smooth dimming effect.
1. Single channel output, output current level selectable by DIP S.W.
2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM)
3. High input voltage of 220VAC ~ 240VAC
4. High efficiency up to 88%
5. Built-in active PFC function
6. 100% output when no dimming signal input, can be used as normal power supply
7. Dimming effect smooth, no flicker
8. Protections: Short circuit, over load, over temperature
9. Suitable for indoor LED lighting application, such as down light, panel light, and so on
Maximum output voltage
Output LF current ripple(< 120 Hz)
220VAC – 240VAC
≧0.95@230VAC, full load
88%@230VAC, full load
＜10%@230VAC, full load
No-load power consumption
Cold start,40A(twidth=12.8us measured at 50% Ipeak) @230VAC
Close output, recovers automatically after fault removed
When the output voltage is exceeded, the output curret decreases and, recovers automatically when the load is reduced.
Shut down the output, recovers automatically when temp. back to normal.
1-10V active signal, adjustable resistance, PWM
-20℃ ~ 50℃
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.