- Model: IP1HMC-30A-1
- Input Voltage: 220-240VAC
- Output Power: 30W
- Output Current: 550~900mA
- Output Channels: 1
30W 550/600/650/700/750/800/850/900mA Constant Current 1-10V Driver
IP1HMC-30A-1 is a constant current output mode LED driver. The output current can be easily set via DIP switch, and the driver can be adjusted by the external 1-10VDC active signal, PWM signal , or adjustable resistance to achieve the smooth dimming effect.
Feature
1. Single channel output, output current level selectable by DIP S.W.
2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM)
3. High input voltage of 220VAC ~ 240VAC
4. High efficiency up to 87%
5. Built-in active PFC function
6. 100% output when no dimming signal input, can be used as normal power supply
7. Dimming effect smooth, no flicker
8. Protections: Short circuit, Over Load, Over Temperature
9. Suitable for indoor LED lighting application, such as down light, spotlights, panel light, and so on.
Technical Parameter
Model | IP1HMC-30A-1 | ||||
Output | Current | 550mA | 600mA | 650mA | 700mA |
Voltage | 9-45VDC | 9-45VDC | 9-45VDC | 9-43VDC | |
Power | 24.75W | 27W | 29.25W | 30.1W | |
Current | 750mA | 800mA | 850mA | 900mA | |
Voltage | 9-40VDC | 9-38VDC | 9-35VDC | 9-34VDC | |
Power | 30W | 30.4W | 29.75W | 30.6W | |
Current accuracy | ±5% | ||||
No load output voltage | 50VDC | ||||
Output LF current ripple(< 120 Hz) | <3% | ||||
Channels | 1 | ||||
Input | Voltage | 220– 240VAC | |||
Frequency | 50/60Hz | ||||
Current | 0.17Amax@230VAC | ||||
No-load power | <0.5W | ||||
Power factor | ≥0.95@230VAC,full load | ||||
THD | <10%@230VAC,full load | ||||
Efficiency | 87%@230VAC,full load | ||||
Inrush current | Cold start,28A(twidth=30us measured at 50% Ipeak) @230VAC | ||||
Protection | Short circuit | after fault removed Close output, the output current recovers automatically | |||
Over load | When the output voltage is exceeded, decreases and,recovers automatically when the load is reduced. | ||||
Over temperature | Shut down the output, recovers automatically when temp. back to normal. | ||||
Function | Dimming | 1-10V active signal, adjustable resistance, PWM | |||
Others | Dimension | 142*51*28 mm(L*W*H) | |||
G.W | 155g | ||||
Working temp. | -20℃ ~ 50℃ | ||||
Relative humidity | 20~90% RH |
Copyright © 1998 ~ 2024 IPON General Electric Industry Co.Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.