Home  >  PRODUCTS  >  Microwave Motion Sensors  >  12VDC dry contact motion detector
12VDC dry contact motion detector-IPON LED
12VDC dry contact motion detector-IPON LED
12VDC dry contact motion detector-IPON LED


10W 120/180/240/300mA*1ch CC DALI Driver


Model: IP-MSensor
Operating voltage: 12Vdc (Can be customized)
HF system: 5.8GHz±75MHz, ISM wave band
Transmitting power:<0.5mW
Power consumption: ≤0.5W(standby),<1W(operation)
Detection zone: Max.(D x H):16mx6m


12VDC dry contact motion detector IP-MSensor


Introduction

The IP-MSensor is an innovative and active motion detectors with HF system 5.8GHz.Motion can be detected through plastic, glass and thin non-metal materials.

It supplies dry contacts in normally closed mode and normally open mode. Dry contact means open or close contact without any current or voltage. It is prefect for use in the solar energy garden lamp or industrial control application where requires isolation between motion signal and power supply.


Product Features

• Dry contact detector works in normally closed mode and normally open mode.

• Automatic switching based on motion and light level.

• Low voltage input 12VDC.

• Detection area, time delay and daylight threshold can be precisely set via DIP switch.


Technical Parameter


Product Name

12VDC dry contact motion detector

Model

IP-MSensor

Operating voltage

12Vdc (Can be customized)

HF system

5.8GHz±75MHz, ISM wave band

Transmitting power

<0.5mW

Power consumption

≤0.5W(standby),<1W(operation)

Detection zone

Max.(D x H):16mx6m

Detection sensitivity

10%/25%/50%/75%/100%

Hold time

10s/30s/90s/3min/20min/30min

Daylight sensor

5lux/10lux/30lux/50lux/Disable

Mounting height

6m Max.

Motion detection

0.5~3m/s

Detection angle

150°(wall installation)/360° (ceiling installation)

Operating temperature

-25℃~70℃

IP rating

IP20


Product Message

RELATED PRODUCTS

Chat Online 编辑模式下无法使用
Chat Online inputting...